References; Server Management - NEC Express 5800 T110F-S Setup Manual

SYSTEM CONFIGRATION GUIDE

References

Server Management

The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Hardware
monitoring
Boot monitoring
Alerting
Remote KVM
(via LAN)
Remote control
(via LAN)
Maintenance
Others
Industry
Standard
1
The feature is not supported on non-hot plug 3.5-inch drive.
2
The standard serial port is not available for the feature.
3
The feature is not supported on VMware systems.
4
Monitoring boot screens is not supported on VMware systems.
5
In VMware systems, only the direct console user interface is supported.
NEC Corporation
–
NEC Express5800/T110f-S / Air cooling model
1
Temperature/hard drive
consumption/ System LAN/degeneration/
1
(memory/hard drive )
Hardware configuration information collection
Hardware event log collection
BIOS/POST stall, Booting, OS stall, shutdown
HW error, Boot error and OS panic
(by SNMP, E-Mail)
POST/BIOS setup, ROM utility
Panic screen, Boot screen
CUI-based screen (OS console)
GUI-based screen (OS console)
Remote Screen Video Capture
Remote reset/power on-off/ dump
Remote Power Capping
BIOS/BMC FW update
Remote BIOS setup(partial configuration only)
OS shutdown
Remote media (CD/DVD/FD/USB)
CLP (Command Line Protocol) (DMTF compliant)
Remote control via Web browser (multi user login
at the same time)
Scheduling (without UPS, require NEC ESMPRO
Manager)
EXPRESSSCOPE® Profile key
(Backup/restore BIOS/BMC setup information)
Set automatic IP address via DNS/DHCP
LDAP/Active Directory verification/user control
Clock synchronization of main unit and the RTC
Access log collection
IPMI support
Revision 3.0 – January 16, 2014
/fan/voltage/power
Standard With Remote KVM
and Media License
 
 
 
3 3
 
 
2
 
2 4 5
 
2 5



-

-
 
 
 
 
3 3
 

-
 
 
3 3
 
 
 
 
 
 
2.0 2.0
kit
36