SYSTEM CONFIGRATION GUIDE –
References
Boot Mode Setting
The server supports Legacy mode and UEFI mode (default) as an OS Boot Mode. See the table below for the Boot Mode and
X2APIC setting for each Operating System. As the default settings at the factory, UEFI mode is set as OS Boot mode and X2APIC is
enabled. Refer to the User's Guide and change the settings before installing an Operating System requiring Legacy Mode.
Operating System
Windows Server 2012
Windows Server 2012 R2
Windows Server 2016
Red Hat Enterprise Linux 7
VMware ESXi 6.0 Update3
VMware ESXi 6.5
NEC Corporation
NEC Express5800/T110i
Supported Boot Mode
UEFI
UEFI
UEFI
UEFI
UEFI
UEFI
Revision 7.0 – June 2018
Supported X2APIC Setting
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
38