Inch Drive Configuration - NEC Express 5800 T110F-S Setup Manual

SYSTEM CONFIGRATION GUIDE
4.3

3.5-inch Drive Configuration

4.3.1 Embedded SATA non-RAID Controller
Category
Storage Controller
Cable
Required
Drive Cage
Required
Drive
2 slots available
4.3.2 Embedded SATA RAID Controller
Category
Storage Controller
Cable
Required
Drive Cage
Required
Drive
2 slots available
NOTE:

Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.

All hard drives within a RAID array should be of the same capacity.
NEC Corporation
–
NEC Express5800/T110f-S / Air cooling model
Product Name / Description
Embedded SATA Controller
4x 6Gb/s SATA
Internal SAS/SATA Cable
miniSAS to 2x Single SATA
3.5-inch Drive Cage
2 x 3.5-inch non hot plug (fixed) drive bays
500GB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
Product Name / Description
Embedded SATA Controller
4x 6Gb/s SATA
, RAID0/1/10 capable
Internal SATA Cable
mini-SAS to 2x Single SATA
3.5-inch Drive Cage
2 x 3.5-inch non hot plug (fixed) drive bays
500GB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
2TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
3TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 3TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
4TB 7.2K non-Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
Revision 3.0 – January 16, 2014
Part Number
(Standard)
K410-278(00)
N8154-65F
N8150-359
N8150-360
N8150-361
Part Number
(Standard)
K410-278(00)
N8154-65F
N8150-359
N8150-360
N8150-361
N8150-362
N8150-396
27