References; Server Management - NEC Express5800/T110j System Configuration Manual

SYSTEM CONFIGRATION GUIDE –

References

Server Management

Hardware
monitoring
Boot monitoring
Alerting
Remote KVM
(via LAN)
Remote control
(via LAN)
Others
Industry
Standard
1
The optional serial port is not available for the feature.
2
The feature is not supported on VMware systems.
3
The feature is not supported on non-hot plug 3.5-inch drive.
4
In VMware systems, only the direct console user interface is supported.
5
ESMPRO/ServerAgentService installation is required. Alternatively, enable NTP (Network Time Protocol) setting and
synchronizen time with NTP server.
6
Power ON, power OFF and OS shutdown from ESMPRO/SM at the specified date and time are supported.
7
ESMPRO/ServerAgentService installation is required.
NEC Corporation
NEC Express5800/T110j
Temperature/hard
3
drive /fan/voltage/power consumption/
System LAN/degeneration/ (memory/hard
3
drive )
Hardware configuration information
7
collection
Hardware event log collection
BIOS/POST stall, Booting, OS stall,
shutdown
HW error, Boot error and OS panic
(by SNMP, E-Mail)
POST/BIOS setup, ROM utility
Panic screen, Boot screen
CUI-based screen (OS console)
GUI-based screen (OS console)
Remote reset/power on-off/ dump
Remote Power Capping
BIOS/BMC FW update
OS shutdown
Remote media (CD/DVD/FD/USB)
CLP (Command Line Protocol) (DMTF
compliant)
Remote control via Web browser (multi
user login at the same time)
Remote batch (No UPS required、
ESMPRO/SM required)
Set automatic IP address via DNS/DHCP
LDAP/Active Directory verification/user
control
Clock synchronization of main unit and
the RTC
Access log collection
IPv6 (Remote control via Web browser,
DMTF compliant CLP only)
IPMI support
Revision 1.0 – December 2018
Standard With Remote
KVM and Media
License kit
 
 
 
 
2 2
 

1 

1


1


-
 
 
 
 
2 2

-
 
 
   
6 6
 
 
   
5 5
 
 
2.0 2.0
27