1. OVERVIEW
1.1 Product Features
Easy network setup with your iPhone / iPad
ONVIF standard supported to simplify system integration
35 IR LEDs built-in for night surveillance
Remote Surveillance
-- Fully compatibility on iPhone & iPad, and Internet Explorer® on Windows® operating system
1.2 Package Content
□ Network camera
□ Quick Setup with iPhone / iPad
1.3 Cable Overview
Cable
Description
Connect to DC12V power supply.
Power cable
Note: The power adapter is optional.
Connect it to the supplied RJ45 cable extender adapter for cable extension, and prepare another RJ45
RJ45 network cable
network cable with suitable length for your connection.
GND
Ground wire, used for reset default or external device connection.
Remove the insulating coating of this wire, and twist it with a ground wire together to reset default. This will
RESET
reset all parameters, including the IP address to factory default settings.
Note: Disconnect power before twisting these two wires together, and connect to power again for
□ Bracket
reset default.
1
Need help?
Do you have a question about the network bullet camera and is the answer not in the manual?