Camera Configurations; System Configuration Menu - Digitus network bullet camera User Manual

3. CAMERA CONFIGURATIONS

Users can further configure this network camera by accessing via Internet Explorer.

3.1 System configuration menu

Click "Config." to enter the configuration page.
Note: You need to be "Supervisor" to enter the system configuration page. If you're not a "Supervisor",
please re-log into the camera with the correct user name and password.
The functions are categorized into six menus: Network, Camera, Record Timer, Storage, Trigger and General.
 For details about "Network", please refer to "3.2 Network" at page 5.
For details about "Camera", please refer to "3.3 Camera" at page 10.

 For details about "Trigger", please refer to "3.4 Trigger" at page 11.
For details about "General", please refer to "3.5 General" at page 12.

Main Menu
Network
Camera
Trigger
Sub-Menu Reference
Network Configure network settings.
QoS Limit the data flow for live streaming.
DDNS Enter DDNS information when the network type is PPPOE or DHCP.
SNTP Synchronize your camera time with the networked computer systems.
Enter the FTP information for event notifications when "FTP" is chosen in "Trigger" →
FTP
"Trigger".
Mail Enter Email information for event notifications when "Email" is chosen in "Trigger" → "Trigger".
Enter text messaging information for SMS notifications when "SMS" is chosen in "Trigger" →
SMS
"Trigger".
Filter Choose to permit or block the IP address(es) which can access this camera.
*Suitable for Windows-based operating system.
UPnP
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
*Suitable for Apple Mac-based operating system.
Bonjour
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
Set the parameters for video data transmission when you're using multimedia other than web
RTP
broswers and Video Viewer for remote access.
1. Rename the camera.
Camera
2. Change the place where the camera name is shown on the screen.
Video Adjust video-related settings in different video format.
Color Adjust the color performance.
Advance Adjust the camera parameters if necessary.
1. Enable / disable the motion detection.
2. Set the motion detection area.
Trigger
3. Configure how the camera reacts for any event.
4