Komatsu PC350LC-8 Operation & Maintenance Manual page 92

DETAILED CONTROLS AND GAUGES
Procedure for operation
1. If working mode selector switch (1) is pressed, the Working
Mode screen is displayed on the monitor.
2. Press function switches F3 or F4 at the bottom of the
screen or working mode selector switch (1) to change the
mode selection one at a time.
q If no switch is touched for more than five seconds, the
selected working mode is automatically set as the
working mode and the screen changes to Steps 3 and
Steps 4.
REMARK
To return to the standard screen without changing the working
mode, press function switch F5.
3. After selecting the desired mode, press function switch F6
and the mode is displayed in the center of the monitor dis-
play.
(Example: If power mode is selected: P)
4. After two seconds, the pilot monitor display at the top right
of the screen is highlighted in orange.
q After two seconds, the screen returns to the standard
screen.
The monitor display highlighted in orange in Steps 4
returns to blue.
3-28
OPERATION