Room Light - Subaru Impreza 2004 Service Manual

LIGHTING SYSTEM

27.Room Light

A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the lens (A) and room light mounting
screws (B).
(B)
3) Disconnect the harness connectors and remove
the light.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATIONS, General Description.>
3) If NG, replace the bulb with a new one.
2. ROOM LIGHT SWITCH
Measure the room light resistance.
Switch position Terminal No.
OFF
ON 1 and 3
DOOR 1 and 2
(B)
(A)
LI-00040
R52
3 2 1
LI-00041
Standard
— More than 1 MΩ
1.5±0.5 Ω
1.5±0.5 Ω
Room Light
LI-30