General Description - Subaru Impreza 2004 Service Manual

LIGHTING SYSTEM

1. General Description

A: SPECIFICATIONS
Headlight
Front turn signal light
Side turn signal light
Clearance/Parking light
Front fog light
Rear fog light
Rear combination light
License plate light
High-mounted stop light
Room light
Spot light
Luggage room light
Trunk room light
Glove box light
B: PRECAUTIONS
• Before disassembling or reassembling parts, always disconnect the battery ground cable. When replacing
radio, control module, and other parts provided with memory functions, record memory contents before dis-
connecting the battery ground cable. Otherwise, the memory will be erased.
• Reassemble in reverse order of disassembly, unless otherwise indicated.
• Adjust parts to the given specifications.
• Connect the connectors securely during reassembly.
• After reassembly, make sure functional parts operate smoothly.
WARNING:
• Airbag system wiring harness is routed near electrical parts and switches. All airbag system wiring
harnesses and connectors are yellow. Do not use electric test equipment on these circuits.
• Be careful not to damage the airbag system wiring harness when servicing electrical parts and
switches.
C: PREPARATION TOOL
1. GENERAL TOOLS
TOOL NAME
Circuit Tester
General Description
Tail light
Sedan
Stop light
Wagon Tail/Stop light
Turn signal light
Back-up light
Standard type
Sedan
Rear spoiler built-in type
Wagon
12 V — 55 W/60 W (Halogen)
12 V — 1.2 W (LED)
Used for measuring resistance and voltage.
LI-2
12 V — 21 W
12 V — 5 W
12 V — 5 W
12 V — 55 W
12 V — 21 W
12 V — 5/21 W
12 V — 21 W
12 V — 5/21 W
12 V — 21 W
12 V — 21 W
12 V — 5 W
12 V — 21 W
12 V — 10 W
12 V — 8 W
12 V — 8 W
12 V — 13 W
12 V — 5 W
12 V — 1.4 W
REMARKS