Table of Contents
Advertisement
www.CareUcar.com
Email: sales02@careucar.com MSN: careucar@hotmail.com
Skype: careucar
Use Voltage (should not fall below 12.6V when fully charged) and the
Internal Resistance [Int.R] (should not more 15m
determine the condition of the tested Deep Cycle Battery.
Batteries that had been left idle for long periods can still be tested with
this analyzer. To perform the test, just clamp the analyzer clips onto the
battery terminals and it will display the screen (Fig.16) as shown if its
voltage falls below the normal 12 volts and a buzzing sound is heard.
Press
key to continue and the display will show: (Fig.17)
Check the battery ratings and enter it as described in step 10 (page 13)
and the results will show as an example below:
Figure 16
Figure 17
Figure 18
Yahoo: careucar@ymail.com
Ω
) readings to
Battery Analyzer Series
-
-
20 -
Advertisement
Table of Contents
