Installer Setting-Dry Contact Mode Setting - LG PQRCUSA0 Owner's Manual

Installation instruction

Installer Setting-Dry Contact Mode Setting

This function allows the Dry contact-indoor unit operate under Auto Run mode or Manual mode with
remote controller.
* Please refer to dry contact manual for more details.
20 Wide Wired Remote Controller
1
Press button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
2 Repeat pressing button to select
Function code 09.
Function Code
Ex) Setting Dry Contact Mode 'ON'
3 Select Dry contact setting by
pressing button.
(00: OFF, 01: ON)
4 Press button to save or release.
5 Press button to exit or
system will automatically exit
after 25 seconds without any
input.
Dry Contact setting value