Table of Contents
Advertisement
The input panel shown is for the PF2-500R digital bi-amplifier used in the VA101i-7-52R
The PF1-500R single channel amplifier used with the VA / VAX15Si subwoofer input panel is identical except for having only 1 mute switch and
status LED. For more detailed information, please refer to the Renkus-Heinz RHAON User's Manual.
VAX15Si subwoofers are shipped wired for fully passive operation using the internal crossover. The crossover can be bypassed by removing the
connector plate from the cabinet and changing several internal connections. For detailed instructions, please refer to the Renkus-Heinz Loudspeaker
User's Manual, form RH508.
RHAON Empowered VARIAi Array Module Connections
Power LED
Primary Analog Input
XLR female
Looping Analog
Output
XLR male
Signal & Overdrive
LED Status Indicators
Input Pad &
LED Indicator
Push Button
Volume Controls
Mute Buttons
AC Line Voltage
Selector
Thermal LED
IEC Power
AC Line Fuse
Connector
Point Source Array Modules
Secondary
Analog input &
Looping Output
Fault Detect
Fault Relay
AC Power
On/Off Switch
i
11
Advertisement
Table of Contents
