Related Manuals for Renkus-Heinz VARIAi VA101i-7
Summary of Contents for Renkus-Heinz VARIAi VA101i-7
- Page 1 MODULAR INSTALLATION ARRAYS VA101i-7 & VAX101i-7 VA101i-15 & VAX101i-15 VA101i-22 & VAX101i-22 VA101i-22/75A & VAX101i-22/75A VA15Si & VAX15Si Subwoofer Users Manual...
- Page 1 MODULAR INSTALLATION ARRAYS VA101i-7 & VAX101i-7 VA101i-15 & VAX101i-15 VA101i-22 & VAX101i-22 VA101i-22/75A & VAX101i-22/75A VA15Si & VAX15Si Subwoofer Users Manual...
-
Page 2: Table Of Contents
Point Source Array Modules TABLE OF CONTENTS Introduction To VARIAi The VARIAi Hardware Ground Stacked Vertical Line Arrays Horizontal Arrays Software Rear Panel Connections & Controls DSP Settings Model Number & Horizontal Coverage Cross Reference... -
Page 2: Table Of Contents
Point Source Array Modules TABLE OF CONTENTS Introduction To VARIAi The VARIAi Hardware Ground Stacked Vertical Line Arrays Horizontal Arrays Software Rear Panel Connections & Controls DSP Settings Model Number & Horizontal Coverage Cross Reference... -
Page 3: Introduction To Variai
Point Source Array Modules Introduction To VARIAi The VARIAi loudspeaker family includes 3 full-range array modules and The VA / VAX15Si is a powerful 15 inch subwoofer that doubles as a a 15 inch subwoofer. All have been designed to offer the ultimate in base for floor standing systems or as a suspension platform for flown versatility and performance. -
Page 3: Introduction To Variai
Point Source Array Modules Introduction To VARIAi The VARIAi loudspeaker family includes 3 full-range array modules and The VA / VAX15Si is a powerful 15 inch subwoofer that doubles as a a 15 inch subwoofer. All have been designed to offer the ultimate in base for floor standing systems or as a suspension platform for flown versatility and performance. -
Page 4: The Variai Hardware
Point Source Array Modules The VARIAi Hardware The array modules include an internal steel rigging infrastructure designed for safe, easy and clean looking installations in venues of any size or complexity. Note: Add 4 lbs. to each enclosure for the rigging connectors (6 lbs. for the SUB Connector). Enclosure Types: enclosure 73 lbs... -
Page 4: The Variai Hardware
Point Source Array Modules The VARIAi Hardware The array modules include an internal steel rigging infrastructure designed for safe, easy and clean looking installations in venues of any size or complexity. Note: Add 4 lbs. to each enclosure for the rigging connectors (6 lbs. for the SUB Connector). Enclosure Types: enclosure 73 lbs... - Page 5 We strongly recommend that you have your design reviewed and approved by a licensed structural engineer VA101i-CN-RPK who can also verify the suitability of the building RHANG-VA101iH attachment points. Renkus-Heinz is not responsible for any non Renkus- Heinz products or for any misuse of Renkus-Heinz products.
- Page 5 We strongly recommend that you have your design reviewed and approved by a licensed structural engineer VA101i-CN-RPK who can also verify the suitability of the building RHANG-VA101iH attachment points. Renkus-Heinz is not responsible for any non Renkus- Heinz products or for any misuse of Renkus-Heinz products.
-
Page 6: Ground Stacked
Point Source Array Modules Ground Stacked Multiple full range array modules can be stacked on the ground or floor using one or more of the matching subwoofers as a base. The array modules and the subwoofers are joined together using MPS, M1 or M2 connectors. -
Page 6: Ground Stacked
Point Source Array Modules Ground Stacked Multiple full range array modules can be stacked on the ground or floor using one or more of the matching subwoofers as a base. The array modules and the subwoofers are joined together using MPS, M1 or M2 connectors. - Page 7 Point Source Array Modules The modular point source nature of VARIAi lends itself to building custom coverage patterns to match room geometries. In this fashion, simple arrays such as the one shown below are straightforward. The MPS connector is the only connector needed and are provided with each loudspeaker. Each connector includes four 1/4”...
- Page 7 Point Source Array Modules The modular point source nature of VARIAi lends itself to building custom coverage patterns to match room geometries. In this fashion, simple arrays such as the one shown below are straightforward. The MPS connector is the only connector needed and are provided with each loudspeaker. Each connector includes four 1/4”...
-
Page 8: Horizontal Arrays
Point Source Array Modules Horizontal Arrays The complementary cabinet angles and tightly controlled dispersion that allow the sonic outputs of VARIAi array modules to be smoothly mixed to obtain the desired coverage perform just as well in horizontal arrays as they do in vertical line arrays. Joining two VA101i-22 22.5º... -
Page 8: Horizontal Arrays
Point Source Array Modules Horizontal Arrays The complementary cabinet angles and tightly controlled dispersion that allow the sonic outputs of VARIAi array modules to be smoothly mixed to obtain the desired coverage perform just as well in horizontal arrays as they do in vertical line arrays. Joining two VA101i-22 22.5º... -
Page 9: Software
Point Source Array Modules Software EASE and EASE Focus II Simulation Software Varia101 GLL data in EASE and EASE Focus II simulation software tools allows you and system designers to quickly and accurately predict the performance of individual Varia loudspeakers and of Varia arrays in various settings. Simply define the audience areas, position the loudspeaker or array, add or remove cabinets and adjust its height, location and aiming angle until you achieve the desired results in the simulation. -
Page 9: Software
Point Source Array Modules Software EASE and EASE Focus II Simulation Software Varia101 GLL data in EASE and EASE Focus II simulation software tools allows you and system designers to quickly and accurately predict the performance of individual Varia loudspeakers and of Varia arrays in various settings. Simply define the audience areas, position the loudspeaker or array, add or remove cabinets and adjust its height, location and aiming angle until you achieve the desired results in the simulation. -
Page 10: Rear Panel Connections & Controls
Point Source Array Modules Rear Panel Connections & Controls VAX101i Connections Screw Terminal Strip Looping In & Out Inputs Neutrik 4-Pin Speakon Connectors VAX101i modules require bi-amplification. An optional passive crossover network is available Optional Array Module High Frequency Control Not all setups are identical and neither are all rooms. -
Page 10: Rear Panel Connections & Controls
Point Source Array Modules Rear Panel Connections & Controls VAX101i Connections Screw Terminal Strip Looping In & Out Inputs Neutrik 4-Pin Speakon Connectors VAX101i modules require bi-amplification. An optional passive crossover network is available Optional Array Module High Frequency Control Not all setups are identical and neither are all rooms. - Page 11 VAX15Si subwoofers are shipped wired for fully passive operation using the internal crossover. The crossover can be bypassed by removing the connector plate from the cabinet and changing several internal connections. For detailed instructions, please refer to the Renkus-Heinz Loudspeaker...
- Page 11 VAX15Si subwoofers are shipped wired for fully passive operation using the internal crossover. The crossover can be bypassed by removing the connector plate from the cabinet and changing several internal connections. For detailed instructions, please refer to the Renkus-Heinz Loudspeaker...
-
Page 12: Dsp Settings
Point Source Array Modules DSP Settings VAX101i-7 & VAX15Si DSP Settings Suggested DSP settings for VAX101i-7 line array modules and their companion VAX15Si subwoofer combinations appear below. Note that these would not apply to self-powered VA101i-7 modules with their built-in DSP. WIRED AS BI-AMP VAX101i-7 AMP GAIN... -
Page 12: Dsp Settings
Point Source Array Modules DSP Settings VAX101i-7 & VAX15Si DSP Settings Suggested DSP settings for VAX101i-7 line array modules and their companion VAX15Si subwoofer combinations appear below. Note that these would not apply to self-powered VA101i-7 modules with their built-in DSP. WIRED AS BI-AMP VAX101i-7 AMP GAIN... - Page 13 Point Source Array Modules VAX101i-15 & VAX15Si DSP Settings Suggested DSP settings for VAX101i-15 line array modules and their companion VAX15Si subwoofer combinations appear below. Note that these would not apply to self-powered VA101i-15 modules with their built-in DSP. WIRED AS BI-AMP VAX101i-15 AMP GAIN 0 dB...
- Page 13 Point Source Array Modules VAX101i-15 & VAX15Si DSP Settings Suggested DSP settings for VAX101i-15 line array modules and their companion VAX15Si subwoofer combinations appear below. Note that these would not apply to self-powered VA101i-15 modules with their built-in DSP. WIRED AS BI-AMP VAX101i-15 AMP GAIN 0 dB...
- Page 14 Point Source Array Modules VAX101-22 & VAX15S DSP Settings Suggested DSP settings for VAX101-22 line array modules and their companion VAX15S subwoofer combinations appear below and on the next page. Note that these would not apply to self-powered VA101-22 modules with their built-in DSP. WIRED AS BI-AMP VAX101-22 AMP GAIN...
- Page 14 Point Source Array Modules VAX101-22 & VAX15S DSP Settings Suggested DSP settings for VAX101-22 line array modules and their companion VAX15S subwoofer combinations appear below and on the next page. Note that these would not apply to self-powered VA101-22 modules with their built-in DSP. WIRED AS BI-AMP VAX101-22 AMP GAIN...
-
Page 15: Model Number & Horizontal Coverage Cross Reference
Point Source Array Modules Model Number & Horizontal Coverage Cross Reference VA101i-7 Series VAX101i-7 Series VA101i-7/6-R: 60 VAX101i-7/6: 60 VA101i-7/9-R: 90 VAX101i-7/9: 90 VA101i-7/12-R: 120 VAX101i-7/12: 120 VA101i-7/69-R: 60 to 90 VAX101i-7/69: 60 to 90 (Transitional) (Transitional) VA101i-7/912-R: 90 to 120 VAX101i-7/912: 90 to 120 (Transitional) -
Page 15: Model Number & Horizontal Coverage Cross Reference
Point Source Array Modules Model Number & Horizontal Coverage Cross Reference VA101i-7 Series VAX101i-7 Series VA101i-7/6-R: 60 VAX101i-7/6: 60 VA101i-7/9-R: 90 VAX101i-7/9: 90 VA101i-7/12-R: 120 VAX101i-7/12: 120 VA101i-7/69-R: 60 to 90 VAX101i-7/69: 60 to 90 (Transitional) (Transitional) VA101i-7/912-R: 90 to 120 VAX101i-7/912: 90 to 120 (Transitional) - Page 16 SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO”. MODULAR INSTALLATION ARRAYS Renkus-Heinz, Inc., 19201 Cook Street, Foothill Ranch, CA 92610-3501, USA Tel: 949-588-9997 • Fax: 949-588-9514 • sales@renkus-heinz.com www.renkus-heinz.com RH-804 Rev A...
- Page 16 SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO”. MODULAR INSTALLATION ARRAYS Renkus-Heinz, Inc., 19201 Cook Street, Foothill Ranch, CA 92610-3501, USA Tel: 949-588-9997 • Fax: 949-588-9514 • sales@renkus-heinz.com www.renkus-heinz.com RH-804 Rev A...