Table of Contents
Advertisement
2. Configure the setting of the EF value.
To change the set value, the printer should be online. Set the printer online to allow for communication.
Setting range is 0.5 - .5.
The value can be directly inputted or can be specified by using the spin button.
GET:
Load the set value from the printer.
SET:
Set the value on the printer by using a PC.
Cancel: Quit this screen. The set value which is being inputted is discarded.
K
Y
Head 3
Head 2
Head 1
(Top view)
Printhead carriage
* Set the printer online to allow for communication with the printer.
* When the application is started up, all the values are shown as .00.
To change the input value, perform the upload operation first to display the latest setting before changing.
* Be sure to click the Download button to reflect the EF value to the printer.
M
C
Head 3
Head 2
Head 1
6
Advertisement
Table of Contents
