Table of Contents
Advertisement
A-6
Adjusting other jumpers:
functions or are not to be adjusted in normal operation. Adjust them according to
the following recommendations.
CCMOS ¡G Put jumper on pin 1 and pin 2.
BIOS Setup:
steps described above and completed the installation, when you power the
computer on, you will see the following message displayed
PRESS DEL TO ENTER SETUP
Press immediately Del key to enter BIOS Setup. Select Load Setup Defaults,
than enter CPU Soft Menu to set CPU parameters.
Some jumpers are reserved for future
Parameters and CPU settings After you have followed the
Appendix A
Advertisement
Table of Contents
