Abit AT6 User Manual page 54

A-2
Installing HDD:
with the drive to the HDD connector, and the other end to IDE1 pin connector
on the mainboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Installing CD-ROM Drive:
cable that comes with the drive to the CD-ROM connector, and the other end to
the IDE2 pin connector on the mainboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Installing Keylock connector:
PN1 - There is a specific orientation for pin 1 to pin 5. Insert the five-threads
keylock cable into correct pins of connector on the mainboard.
Pin number Name of the signal or signification
1
2
3
4
5
Installing HDD LED connector:
PN1 - There is a specific orientation for pin 7 and pin 8. Connect the two-threads
IDE LED connector to the connector on mainboard.
Pin number Name of the signal or signification
7
8
IDE1- Connect one end of the 40-pin cable that comes
IDE2- Connect one end of the 40-pin
+5VDC
No connection
Ground
Keyboard inhibit Signal
Ground
HDD LED signal ¡iLED Cathode ¡j
HDD LED signal ¡iLED Anode ¡j
Watch the pin position and the
orientation
Watch the pin position and the
orientation
Appendix A