Table of Contents
Advertisement
3-6
to verify that the CPU is able to work normally when CPU speed,
operating temperature and power supply are 2.5% higher or
lower than the standard values. This is to guarantee product
stability. We require the manufacturer of the Clock Generator to
meet the demands of our development department and to add a
TURBO Frequency feature used for testing purposes by our
R&D department. Of course, you can use this feature to test the
stability of your own system, but after you have tested the
product, we recommend that you set it back to its normal value
in order to guarantee system stability.
Attention: After setting up the parameters and you leave the BIOS SETUP, and
you have verified that the system can be booted, do not press the
Reset button or turn off the power supply. Otherwise the BIOS will
not read correctly, the parameters will fail and you must enter CPU
SOFT MENU™ again to set up the parameters all over again.
Chapter 3
Advertisement
Table of Contents
