Main Pcb Programing - Turbo Air TGIM-23* Service Manual

5.

MAIN PCB PROGRAMING

1. HOW TO USE THE DISPLAY PANEL
- The default temperature setting is 16℉.
- The operating temperature is between 27℉ and 5℉, which can be adjusted by using
the arrow key.
TGIM-23*
-. The compressor continuously operates for 120 minutes
-. Press 'TURBO FREEZE' button again to deactivate
TGIM-49*
-. Adjust to desired temperature setting between 27℉ to 5℉ with (+) and (–)
buttons on the display.
p
under 'TURBO FREEZE' mode.
'TURBO FREEZE' mode.
LAMP SWITCH
y p
POWER SWITCH