Advertisement
44
3
5
6
Check transmission oil level (125/200)
In order to check the transmission oil level the control screw
cover is to be removed. Oil should just barely escape from the inspection
opening when the motorcycle is in an upright position. If necessary, remove
the plug
T
RANSMISSION AND CLUTCH WILL BE SUBJECTED TO EXCESSIVE WEAR AND TEAR IF YOU USE
TOO LITTLE OR LOW GRADE OIL
1
2
Changing the transmission oil (125/200) *
To change the gear oil warm up the engine and park the motorcycle on a
horizontal surface. Remove oil drain plugs
into an appropriate container. Clean the magnets of the oil drain plugs and
mount them together with the appropriate gaskets. Fill in 0.7 l oil (see tech-
nical data- engine), mount the plug
T
RANSMISSION AND CLUTCH WILL BE SUBJECTED TO EXCESSIVE WEAR AND TEAR IF YOU USE
TOO LITTLE OR LOW GRADE OIL
4
Check transmission oil level (250/300)
In order to check the transmission oil level the control screw
cover is to be removed. Oil should just barely escape from the inspection
opening when the motorcycle is in an upright position. If necessary, remove
the plug
T
RANSMISSION AND CLUTCH WILL BE SUBJECTED TO EXCESSIVE WEAR AND TEAR IF YOU USE
TOO LITTLE OR LOW GRADE OIL
Changing the transmission oil (250/300) *
To change the transmission oil run the engine warm and set up the motorcy-
cle on a horizontal surface. Remove the oil drain screw
7
into a container. Clean the magnet of the oil drain screw and reinstall oil
drain screw with seal. Pour in 0.8 litres engine oil (see technical data engine),
replace plug
T
RANSMISSION AND CLUTCH WILL BE SUBJECT TO EXCESSIVE WEAR AND TEAR
TOO LITTLE OR LOW GRADE OIL
2
and top up with oil (see technical data engine).
!
CAUTION
. U
SE ONLY HIGH
2
CAUTION
!
. U
SE ONLY HIGH
6
and top up with oil (see technical data- engine).
!
CAUTION
. U
SE ONLY HIGH
6
and check engine for leaks.
CAUTION
!
. U
SE ONLY HIGH
1
on the clutch
!
-
.
GRADE OIL
3
4
and
and drain the used oil
and check the engine for leaks.
!
-
.
GRADE OIL
5
on the clutch
!
-
.
GRADE OIL
7
and drain used oil
!
,
IF YOU USE
-
.
GRADE OIL
Hide quick links:
Advertisement
