Rayvision 8-Channel User Manual page 89

Load Settings from USB
USB Disk
Free Capacity
Total Capacity
Read File
This tool can help you load the system environment configuration from the USB device.
Click [ File select] to select the file you would like to load.
LOAD SETTINGS FROM USB-FILE SELECT
 Env2010-07-14_0531.env
 Env2010-07-11_0526.env
 Env2010-07-09_0525.env
 Env2010-07-08_0504.env
Click [ Load File] to load the selected file from USB device. It will show the following
message:
Restore Default Setting
This command resets the system to its default settings.
Format USB Drive 
Firmware Update 
Environment Setting
LOAD SETTINGS FROM USB
[ Load File] [
LOAD SETTINGS FROM USB
File 'Env2010-07-14_0503.env' Loaded.
System will restart...
UTILITY/TOOLS
Save Setting to USB 
Load Setting from USB 
Restore Default Setting
Compact 4Ch H.264 Network DVR-MU.Ver1.1
[General Flash Disk]
[905MB]
[1005MB]
[Env2010-07-14_0503]
File Select]
(Generic)
(Generic)
(Generic)
(Generic)




75