Table of Contents
Advertisement
Compact 4ch H.264 Network DVR-MU.Ver1.1
13.
Put the top cover back by slide and slightly forwards.
14.
Fix the top cover by four screws on either side.
The DVR can automatically detect the video format (either NTSC or PAL) after the
cameras have been properly installed and the DVR has been powered on.
Please refer the section "Hardware Setup" to setup the NTSC/PAL auto detection.
2.2 Sensor and RS485 Connector Installation
8 Channel DVR
The 4/8-channel DVR follows the same way to install the Sensor and RS485
connectors.
Please refer to the following procedures:
18
Top Cover
Advertisement
Table of Contents
