Disc Brake Pads And Discs - Subaru 2001 FORESTER Service Manual

Periodic Maintenance Services

22. Disc Brake Pads and Discs

SA07695
A: INSPECTION
1. DISC BRAKE PAD AND DISC
1) Jack up vehicle and support with rigid racks.
Then remove wheels.
2) Visually check pad thickness through inspec-
tion hole of disc brake assembly. Replace pad if
necessary.
Pad thickness including back metal mm (in)
Standard
Service limit
Service limit
(exclusive back metal)
3) Check the disc rotor, and correct or replace if it
is damaged or worn.
Brake disc thickness mm (in)
Standard 24 (0.94)
Wear limit 22 (0.87)
4) Measure the disc rotor runout at a point less
than 5 mm (0.20 in) from the outer periphery of the
rotor.
Disc rotor runout limit:
Front: 0.075 mm (0.0030 in)
Rear: 0.075 mm (0.0030 in)
DISC BRAKE PADS AND DISCS
SA07695A10
SA07695A1001
GI0056A
Front Rear
17 (0.67) 14 (0.55)
7.5 (0.295) 6.5 (0.256)
1.5 (0.059) 1.5 (0.059)
GI0057A
Front Rear
10 (0.39)
8.5 (0.335)
NOTE:
When replacing a pad, always replace the pads for
both the left and right wheels at the same time.
Also replace pad clips if they are twisted or worn.
PM-32
GI0058