Ic-F7000; Specifications - Icom IC-F7000 Service Manual Addendum

SECTION 1

• IC-F7000

M General
• Frequency coverage :
Receive
Transmit
13.4–14.9999
20.0–20.9999
• Type of emission : J3E (USB/LSB), J2B (AFSK),
(depends on version)
• No. of memory Ch. : 500 channels (max.)
• Usable temp. range : –10°C to +60°C
• Frequency stability : ±50 Hz
• Power supply : 13.8 V DC
• Current drain :
Transmit (typical) at max. power 23 A [AUS]
Receive
• Dimensions (projections not incl.):
Main unit
Controller (RC-26)
Speaker (SP-25)
Microphone (HM-155) 65(W)×105(H)×35(D) mm
• Weight (approx.) :
Main unit
Controller (RC-26)
Speaker (SP-25)
Microphone (HM-155) 234 g
• Accessary connector : 8-pin DIN connector
• Controller connector : 8-pin MINI DIN connector
• REMOTE connector : D-sub 9-pin
All stated specifications are typical and subject to change without notice or obligation.

SPECIFICATIONS

(Unit: MHz)
0.5–29.9999
1.6–5.4999 5.73–5.9999
6.7–8.0999 10.0–11.1999
18.0–18.9999
23.0–27.9999
F1B (FSK), A1A (CW),
A3E (AM)
(negative ground)
(10.8–15.6 V DC)
28 A [OTH]
at max. audio 3.0 A
240(W)×72(H)×239(D) mm
150(W)×50(H)×51(D) mm
106(W)×62(H)×46(D) mm
4.6 kg
220 g without cable
370 g
(RS-232C/NMEA)
M
Transceiver
• Output power
1.6–27.9999 MHz
1.6–3.9999 MHz
4.0–27.9999 MHz
• Spurious emission
• Carrier suppression : More than 40 dB
• Unwanted sideband : More than 50 dB
suppression
• Mic. connector
M
Receiver
• Sensitivity:
J3E, A1A
(0.5–1.5999 MHz)
(1.8–29.9999 MHz) 0 dBµV emf
A3E
(0.5–1.5999 MHz)
• Spurious response rejection ratio:
(1.6–29.9999 MHz) More than 70 dB
• AF output power:
(at 13.8 V DC)
Main unit
Controller (RC-26)
• CLARITY variable range: ±150 Hz
• SP connectors:
Main unit
Controller (RC-26)
1 - 1
:
100/50/10 W p-p [AUS]
125/50/10 W p-p [OTH]
100/50/10 W p-p [OTH]
: Less than –43 dB
below peak output power
(Less than –40 dB for 3.5–
3.9999 MHz range [OTH])
below peak output power
below peak output power
: 8-pin modular jack
(2.4 k
28 dBµV emf
(20 dB SINAD)
14 dBµV
(10 dB S/N)
(20 dB SINAD)
–14 dBµV
(10 dB S/N)
46 dBµV emf
(20 dB SINAD)
32 dBµV
(10 dB S/N)
More than 4.0 W at 10%
distortion with a 4 Ω load
More than 2.0 W at 10%
distortion with a 4 Ω load
2-conductor
")/4 Ω
1
3.5 (d) mm ( /
8
2-conductor
")/4 Ω
1
3.5 (d) mm ( /
8
Ω
)