To obtain consistent performance over the lifetime of your NaceCare equipment, read Do not allow the machine to be used by a child. through these instructions and save them for Close attention is necessary when used near future reference.
GROUNDING INSTRUCTIONS BRUSH AND PAD DRIVER INSTALLATION This appliance MUST be grounded. If it should malfunction or break down, the ground reduces the risk of electric shock. This machine is supplied with a 3 prong grounded electrical plug and can only be used with a 3 prong grounded electrical outlet.
Page 4
The toggle switch located on the side of the handle will change the speed from 175 to 300 RPM. Do not operate this floor machine for buffing in low speed. It will not do an effective job and may overload the motor. NaceCare Solutions 1205 Britannia road east Mississauga, Ontario, Canada...