Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nacecare NA1520
Summary of Contents for Nacecare NA1520
- Page 1 Standard Floor Machine Owner’s Manual Operation Care Service 13” 175 RPM 1.5 HP 13” 160 RPM 1.5 HP XHD 15” 175 RPM 1.5 HP 15” 160 RPM 1.5 HP XHD 17” 175 RPM 1.5 HP 17” 160 RPM 1.5 HP XHD 20”...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Machine Specifications ....................1 Service Information ....................2 Important Safety Instructions ...................2 Grounding Instructions ....................3 Operations / Accessories ..................3 Brush And Drive Block Installation ..............4 Adjustments......................4 Controls .......................5 Guidlines For Operation ..................5 Cord Storage .......................5 Clean Up And Storage .....................5 Floor Machine Assemblies ..................6 Floor Machine Parts List .................. -
Page 3: Service Information
SERVICE INFORMATION Do not allow the machine to be used as a toy. To obtain consistent performance over the life Close attention is necessary when used near of your equipment, read through these instruc- children. Do not leave the machine connected to tions and save them for future reference. -
Page 4: Grounding Instructions
GROUNDING INSTRUCTIONS This appliance must be grounded. If it should mal- function or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord that has an equipment-grounding conductor and grounding plug. -
Page 5: Adjustments
BRUSH AND PAD DRIVER INSTALLATION UNLOCK NOTE: Disconnect the power cord from the electrical outlet before installing a brush or pad LOCK driver. Figure 5 Figure 4 UNLOCK To install a brush or pad driver, leave the handle in the upright position and tip the machine backwards so it rests on its wheels and upper handle section (Figure 4). -
Page 6: Cord Storage
DO NOT LET THE MACHINE REST ON THE Push forward to disengage safety PAD OR BRUSH FOR AN EXTENDED PERIOD switch lock. OF TIME. This may alter the shape of the pad or brush which may cause the machine to wobble. CORD STORAGE When not in use, loosely wind the power cord around the cord storage hook on the handle shaft and both of... - Page 9 PRODUCT IDENTIFICATION LABEL FOR PROPER SWITCH OPERATION SEE SWITCH INSTRUCTION BULLETIN INCLUDED WITH SWITCH KIT.
- Page 12 MOLDED NEMA 5-15P PLUG...
-
Page 14: Optional Accessories
OPTIONAL ACCESSORIES Model Model Option 17” 1.5 HP 175 RPM 20” 1.5 HP 175 RPM Description A0002 A0003 Polypropylene Brush A0004 A0005 Polish Brush A0006 A0007 Nylon Brush A0008 A0009 Grit Brush A0010 A0011 Pad Driver A0001-NAT4 A0001-NAT Solution Tank Kit A0019 A0019 Clutch Plate (Plastic) -
Page 15: Limited Warranty
LIMITED WARRANTY Your equipment which has been manufactured, tested and inspected in accordance with carefully specified engi- neering requirements, is warranted to be free from defects in material and workmanship. This Limited Warranty is, however, subject to the Following qualifications, conditions and limitations which are set forth to provide you and all users of the equipment with information concerning the duration, extent, availability, and applicabil- ity of this Limited Warranty, the procedure to be taken to obtain its performance, and other information concerning the Limited Warranty policy.