Now you are almost ready to go Feva sailing. All that is left to do is:
Fit the
rudder
Tidy the
halyards
Check that all knots and
1) To fit the rudder, simply line up the pins with the fitting on the back of the
boat and push down until the
may be difficult to get on at first – all it will need is a simple wiggle from side
to side whilst pushing down.
2) To remove the rudder, simply push the
3) Coil the
main
picture 4.20).
4.11 Completion
to the back of the boat
away
shackles
retaining clip
and
jib halyards
neatly and stow them in the
TIME TO GO SAILING!
are tied securely
„clicks‟ into place. The
retaining clip
in and pull the
rudder
stock
up.
halyard bag
(see