LDC Racing Saliboats RS FEVA Owner's Manual page 43

Now step the mast, following the instructions in Section 4.4 –
Stepping the Mast
Make sure that the
sides of the mast.
To rig the gennaker:
1) Unroll the gennaker.
2) Take the tack line
of the gennaker, using a
the tack line needs to be left in place, as it determines how far the
comes out when the
3) Tie the end of the
Tie a rope bobble onto the
attached it to the
easier.
4) The gennaker downhaul line
rigged. It is running through the
Picture 4.29 The Gennaker Halyard Block
TOP TIP
gennaker halyard
that emerges from the end of the
bowline (see picture 4.30). The knot that is already in
gennaker is hoisted.
gennaker halyard
gennaker
head of the gennaker. This will make dropping the
(the other end of the
gennaker
and the downhaul line
bowsprit
to the head of the gennaker, using a bowline.
TOP TIP
halyard, about 10 cm from the
gennaker
chute, and is tied to the
are on opposite
and tie it to the tack
bowsprit
bowline that
gennaker
halyard) is already
tack bar.