Rigging The Mast - LDC Racing Saliboats RS FEVA Owner's Manual

If you have the Jib
Jib, and Section 4.10 Rigging the Gennaker before stepping the
To complete this section, you will need:
 The
mast top section
 The
mast lower section
 The
main halyard
1) Place the mast top section
other.
2) Slide the inner sleeve of the
section (see picture 4.5).
3) Push the two
should ensure that the

4.3 Rigging the Mast

and/or Genneker Pack, please refer to Section 4.9 Rigging the
and
mast top section
mast sections together (see picture 4.6). The angle of the join
mast track
Picture 4.5 Joining the Mast
Picture 4.6 A Joined Mast
mast lower section
into the end of the
on the two sections aligns.
mast in the boat.
on the ground, in line with each
mast lower