Specifications - Sartorius TopMix2.Touch TM02-X Operating Instructions Manual

Specifications

Specifications
TopMix TM02-X with Ex-link Converter (YCO12-Z)
Model
Permitted operating/ambient temperature
Housing measurements (W D H)
TopMix control unit
Ex-link converter (W D H)
Net weight, TopMix control unit, approx.
ex-link converter, approx.
bracket
ex-link cable
Power connection
Frequency
Power consumption (typ.)
Device ID [explosion protection]
Terminal/control panel TM02-X
Ex-link converter YCO12-Z
The terminal/control panel is suitable for
use in Zone 1 potentially explosive areas
in accordance with Directive 94/9/EC
(category 2 equipment).
IP protection rating
Ambient Conditions
Environment
Ambient temperature: Storage and transport
Ambient temperature: Operation
Maximum relative humidity
Safety of Electrical Equipment
Electromagnetic Compatibility
Defined immunity to interference:
Emissions:
16 Operating Instructions TopMix
TM02-X
°C +0 to +40
mm 420 315 332 (with bracket)
mm 320 240 71
kg 7
kg 2
kg 1.5
kg 1.5
V 100 – 240 V ~
Hz 50 – 60
VA 25
II 2G Ex ib mb IIB T4 Gb DEKRA 12ATEX0246 X)
II (2)G [Ex ib Gb]IIB DEKRA 12ATEX0246 X)
IP 40 (as per EN 60529/IEC60529)
For indoor use only
–10°C to +60°C
0°C to +40°C
80% for temperatures up to 31°C, decreasing linearly up to 50% relative
humidity at 40°C
In accordance with EN 61010-1:2010
Safety requirements for electrical equipment for measurement, control, and
laboratory use – Part 1: General requirements
In accordance with EN 61326-1:2006
Electrical equipment for measurement, control, and laboratory use
EMC requirements – Part 1: General requirements
Industrial areas
Class B: Suitable for use in residential areas and areas that are directly
connected to a low voltage network