Installation - Mounting The Water Heating Unit - Heatrae Sadia Aquatap Installation & User's Instructions

4.0 INSTALLATION – MOUNTING THE WATER HEATING UNIT
4.1 The AQUATAP water heating unit is free standing and must be mounted on a level
surface. If being mounted in a cupboard, on a shelf or false base, ensure that
the supporting surface can carry the full weight of the unit (see TECHNICAL
SPECIFICATIONS Section 2.0, page 4)
4.2 Refer to FIG. 1, page 4 for details of the dimensions of the AQUATAP water heating unit
and the relative positions of the water and electrical connections.
4.3 The AQUATAP heater unit must be located beneath the dispensing tap. It must be
dispensing tap to the OUTLET and VENT connections on the AQUATAP unit. The pipes
must not be lengthened. The dispenser tap can be positioned so it discharges into a sink
or mounted on its own purposed designed drip tray (available as an accessory, Product
Code 95970138).
top rear edge of the unit, it must be ensured that these can be accessed in order to
facilitate removal of the front cover for maintenance and servicing.
cable. It is recommended that this is connected to a fused double pole isolating switch
electrician. Refer to Section 9.0, page 14 INSTALLATION – ELECTRICAL
REQUIREMENTS for full details of the electrical installation.
8