5.0
INSTALLATION - WATER SUPPLY
5.1
The INLET connection to the AQUATAP water heating unit is located on the top rear
to make a compression connection directly to the INLET connection.
facilitate servicing the heater.
5.5
The hot OUTLET connection from the AQUATAP water heating unit is located on the top
hot supply hose to the dispensing tap is attached. Refer to section 8.0 INSTALLATION –
DISPENSING TAP CONNECTION, page 12 for full details of how to mount and connect
the dispensing tap to the water heating unit.
FIGURE 4: PLUMBING DIAGRAM
HOT TAP
OUTLET
HOSE
TAP
VENT
HOSE
CLAMP
ISOLATING
FLEXIBLE
VALVE
HOSE
CLAMP
MAINS
WATER
SUPPLY
9