Motorola MTP850 Ex User Manual page 137

Editing Scan Lists
1. From the main menu,
select More... > Group
Setup > Scan > Scan
Lists
.
2. Scroll to the required
scan list. Press View to
see the groups used in the scan list. Press Back to return
to the previous display.
3. To edit/view the contents of a scan list, press
4. In the List Optns sub-menu, scroll to the required option
and press Select
The options below cannot be used for the Network List.
If the Network List is empty, it will not be displayed.
• Check the capacity of the active scan list (number of
groups stored in the list).
• To Clear all groups from the selected scan list, press
Yes
.
selected scan list.
• Add a group to the selected scan list. Every added
group (including a favourite group) comes with its folder,
its name or number, and its priority (if pre-programmed).
> To select a folder, scroll through the folder list. The list
does not show folders whose groups are fully used in
the selected scan list. Press Ok to select a folder.
> To select a group, scroll through the group list within
the selected folder. The list shows groups that are not
in the selected scan list. Press Ok
> To set a priority to a group, scroll through the priority
list: high, medium, or low.
A call from a high priority group will interrupt an on-
going call with a medium and low priority.
A call from a medium priority group will interrupt an
on-going call with a low priority.
.
You will be prompted to remove all groups from the
Scan Lists
Scan List 1
Scan List 2
Network List
View Back
.
List Optns
Capacity
Clear List
Add Group
Edit
Select Back
.
MENU
129