Installing And Removing The Logs And Coals - Lopi Spirit Bay Owner's Manual

Installing and Removing the Logs and Coals

NOTE: If the logs are not installed properly, the heater will not burn properly.
a
b
c
M
AINTAINING
Pilot Assembly
Burner Pan
Place the left twig so
the two holes accept
the pins in the front
and rear log.
Left Twig
When in place, the
logs look like this.
Y H
OUR EATER
Rear Log (largest)
Front Log
Make sure this notch straddles
the pilot assembly.
Place the right twig over the
left twig so the hole accepts
the pin on the left twig.
Right Twig
Place the coals on this ledge at the front of the firebox .
Do not place the coals over the burner holes.
Align the right twig so the two lower
branches rest on the front log.
(C )
ONTINUED
Place the rear
log so the flat
portion rests on
this ledge.
Place the front log
on top of these
clips and slide it all
the way back.
P 17
AGE