Installing the BACnet Gateway
Installation
plate
Assistant hole
wiring groove
12
E-
NASAS_MIM-B17N_BACnet Gateway_IM_EN_03719A(1).indd 12
1
Separate the installation plate on the rear side of BACnet
Gateway.
2
Fix the installation plate on the wall using 4 screws.
3
Hang the BACnet Gateway on the groove which is on the
top of the installation plate.
4
Fix the installation plate and BACnet Gateway using 2 screws.
Depending on the installation environment, fix BACnet
Gateway using assistant holes.
( Screws for assistant hole are not provided by our
company.)
5
If you install BACnet Gateway inside of the wall or wiring
from the rear side is needed, use wiring groove on the
bottom of BACnet Gateway.
To prevent breakdown and damage of BACnet Gateway, and
for safe usage, it is recommended to install BACnet Gateway on
the wall.
2013-04-25 오전 10:14:34