T Ypes S Upported - Samsung BACnet Gateway MIM-B17N Installation Manual

Standard Object Types Supported
Object Type
Analog Input
Analog Output
Analog Value
Averaging
Binary Input
Binary Output
Binary Value
Calendar
Command
Device
Event Enrollment
File
Group
Life Safety Point
Life Safety Zone
Loop
Multi-state Input
Multi-state Output
Multi-state Value
Notification Class
Program
Pulse Converter
Schedule
Trend Log
Access Door
Event Log
Load Control
Structured View
Trend Log Multiple
60
E-
NASAS_MIM-B17N_BACnet Gateway_IM_EN_03719A(1).indd 60
Support
[Indoor temperature], [The power value after the basic date],
[The number of hours usage of an indoor unit after the basic date],
[Power value within period], [The number of hours usage of an indoor unit within
period], [Indoor unit error code], [AHU error code], [ERV error code], [EHS error code],

[Current temperature of water out], [Current temperature of hot water],
[Centralized controller error code], [Interface module error code],
[SIM interface module error code], [DMS status], [DMS error], [Discharge current
temperature], [Outside temperature]

[Set temperature], [Setting lower temperature limit],
[Setting upper temperature limit], [Discharge cooling set temperature],
[Discharge heating set temperature], [Cool capacity compensation],

[Heat capacity compensation], [Set temperature of water out]
[Set temperature of hot water], [Lower temperature limit for water out],
[Upper temperature limit for water out], [Upper temperature limit for hot water]

[DI], [Filter sign status], [Compressor status], [Displayed temperature type],

[Thermostat usage], [Outing]
[DO], [Filter sign reset], [All Device off]

[Power On/Off control], [Setting the fucntion of limiting lower temperature]
[Setting the function of limiting upper temperatue ], [SPI setting],
[HumanSensor setting], [Humidification setting], [Outdoor air intake setting],
[Ourdoor cooling setting], [Apply lower temperature limit for water out],

[Apply upper temperature limit for water out],
[Apply upper temperature limit for hot water], [On/Off status of hot water mode],
[Status of quiet operation]


[DMS], [A/C Indoor Unit], [ERV], [AHU], [EHS], [SIM], [Centralized controller], [Interface

module], [DDC]






[Current humidity status]


[Operation mode control], [Fan speed control], [Air flow direction control],
[Setting Cool only/ Heat only/ No Limit ], [Control Enable RC/ Disable RC /Level1],

[Set humidity status], [Status of hot water operation mode]
[AC Indoor Notify], [ERV Notify], [AHU Notify], [Centralized Controller Notify],

[Interface Module Notify], [SIM Notify], [Gateway Notify], [EHS Notify]









Description
2013-04-25 오전 10:14:42