7.1.3 DISASSEMBLY
Note)
Never hold this figure's upper part such as transfer grille, hazard switch. Hold within the
hatchingline part, lower of the illustration.
Note)
For the installation position is fixed as the factory setting position, never disassemble the bracket
which is showed at Fig. 4 and 5. If the position is changed, it is impossible to maintain the installation
accuracy to customer's vehicle.
-
Removing the Grille Assy (Fig.1)
Remove the six screws and then remove the
Grille Assy.
FX-MG8517ZT,MG8817ZT
Grille Assy
Fig.1
91