Removing The Keyboard Pcb, Right Pcb And Left Pcb; Removing The Frame Unit; Removing The Case; Removing The Chassis - Pioneer Fx-Mg8517Zt/Uc Service Manual

FX-MG8517ZT,MG8817ZT
-
Removing the Keyboard PCB, Right PCB and
Left PCB (Fig.2)
Remove the two screws and then remove the
Holder Unit.
Remove the eleven screws and then remove
the Keyboard PCB, Right PCB and Left PCB.
- Removing the Frame Unit (Fig.3)
Remove the five screws and then remove the
Frame Unit.
- Removing the Case (Fig.4 and Fig.5)
Remove the four screws and then remove the
Case.
-
Removing the Chassis (Fig.4, Fig.5 and Fig.6)
Remove the nine screws.
Remove the two screws and then remove the
Chassis.
Note)
As the installation positions of the left and right
brackets are fixed, never remove them.
92
Keyboard PCB
Left PCB
Holder Unit
Fig.2
Frame Unit
Fig.3
Bracket
Fig.4
Right PCB