Calories Program; Distance Program - SteelFlex Treadmill User Manual

OPERATION SYNOPSIS OF PROGRAMS

CALORIES PROGRAM

1.After selecting the Calories Program, the user inputs the Calories
desired to'burn', then presses "Start" to begin. Calories will count
down and end routine when Calories reaches "0".
2.The user makes all speed and elevation changes manually.
3.When the belt starts, a Dot Matrix Track Shows ¼ mile track. A
Blinking L.E.D. indicates present location simulated on the track.
In the center of the track will be a "0". L.E.D.'s turn off when
"Passed". When all L.E.D.'s turn off the user has completed ¼ of a
mile, then a "1" will be displayed in the center of the track, and all
L.E.D.'s will be on indicating the beginning of the user's 2nd ¼ mile
run. This will continue for as long as the runner is on the treadmill.
The final number displayed in the center of the track will indicate
how many ¼ miles have been completed.

DISTANCE PROGRAM

1.After selecting the Distance Program, the user inputs the Distance
desired for routine, then presses "Start" to begin. Distance will count
down and end routine when Distance reaches "0".
2. The user makes all speed and elevation changes manually.
3. When the belt starts, a Dot Matrix Track Shows ¼ mile track. A
Blinking L.E.D. indicates present location simulated on the track.
In the center of the track will be a "0". L.E.D.'s turn off when
"Passed". When all L.E.D.'s turn off the user has completed ¼ of a
mile, then a "1" will be displayed in the center of the track, and all
L.E.D.'s will be on indicating the beginning of the user's 2nd ¼ mile
run. This will continue for as long as the runner is on the treadmill.
The final number displayed in the center of the track will indicate
how many ¼ miles have been completed.
22