SteelFlex Treadmill User Manual page 21

OPERATING INSTRUCTIONS
NOTE:
1.Press "
STOP
but elevation will not change. After treadmill belt has stopped,
the information window for ( TIME, HEART RATE, CALORIES,
then PACE, DISTANCE, AVG SPEED) will rotate between values
every 5 seconds, a large STOP will show in the dot matrix. This
is telling you to press the "
information. If the user presses "
routine will begin at minimum speed, and routine will "Add" to
the exercise values displayed.
2.Pressing "
COOL
DOWN
speed and elevation until minimums are reached, and then belt
stops. After belt stops, user and restart by pressing "
or press "
3.Press " ", when asked in the scrolling display to enable
elevation / incline.
" during exercise, speed will decrease to "0",
STOP STOP
" during a routine will begin slowly decreasing
" to reset.
STOP
" to reset treadmill last user
" before "
START
",
STOP
"
START
20