ZyXEL Communications FMT3211 User Manual page 9

First, power up your DSL router. Connect the Ethernet cable to an
available Ethernet port on your DSL/Cable router.
Then connect the other end of the Ethernet cable to the FMT3211 LAN1
port. Connect the power adaptor cable into the jack named Power, and
then plug the power adaptor to an AC socket.
After a few seconds the Power status indicator lights up, and the
Ethernet port status indicators on both the FMT3211 and the DSL/Cable
router should light up green (flash green). After 60 seconds the Ethernet
port status indicator light on the FMT3211 will automatically shutdown.
9