ZyXEL Communications FMT3211 User Manual page 17

Case Description
Authentication via the
security gateway has
10
failed during the setup
Connectivity to the
11 FMT3211 network
concentrator failed.
Network timing not
12
achieved in FMT3211.
Failed FMT3211 test to
ensure product is
13 operation within defined
operator regional
boundaries.
Failed to authenticate
with PPPoE ISP. Where
customer has locally
14
configured unit to PPPoE,
to be compatible with
The FMT3211 has a
hardware fault. Please
15
contact the service
The FMT3211 is too hot.
Move to a cooler location,
16 i.e. move away from
heater or move out of
direct sunlight.
When the FMT3211 is preparing to provide service, it may automatically
reboot if it has a problem connecting to the service provider's network.
17
The light pattern will be the same as the one shown during the start up
process.
local ISP.
provider.
Power Internet
Red
Off
flashing
Red Orange
flashing stable
Red Orange
flashing stable
Red Orange
flashing stable
Red Orange
flashing stable
Red
Off
flashing
Red Orange
flashing flashing
phase.
17
Service Use
Orange Orange
stable stable
Off Off
Orange
Off
stable
Orange
Off
stable
Orange Orange
stable stable
Off Off
Orange Orange
flashing flashing