Upnp Tab; Setting The Security - Security Menu; User Tab; Administrator, User 1 To - Sony Ipela SNC-VB635 User Manual

Move up
Increases the priority of the rule.
Select a rule from the QoS table to prioritize and click
Move Up.
Move Down
Decreases the priority of the rule.
Select a rule from the QoS table to lower its priority and
click Move Down.
QoS table
Displays the list of registered QoS information. If
multiple conditions match, the rule with the smallest
number has priority.
OK/Cancel
See "Buttons common to every menu" on page 22.

UPnP Tab

Set UPnP (Universal Plug and Play).
Discovery
Enable
If the UPnP discovery function is enabled, you can
search the camera by using UPnP.
If you want to disable this function, deselect the
checkbox for the UPnP discovery function.
42
Setting the Security — Security Menu
Setting the Security
— Security Menu
When you click Security in the Administrator menu, the
Security menu appears.
The Security menu consists of the User, Access limit,
SSL, 802.1X and Referer check tabs.

User Tab

Set the user names and passwords of Administrator and
up to 9 types of user (User 1 to User 9), and the viewer
mode of each user.

Administrator, User 1 to 9

Specify User name, Password, Re-type password and
Viewer mode for each user ID.
User name
Type a user name between 5 and 16 characters.
Password
Type a password between 5 and 16 characters.
Re-type password
To confirm the password, retype the password that you
typed in the Password box.
Audio
Use the SNC audio upload tool to set whether to enable
the audio output to the speaker connected to the line
output jack of the camera or the built-in speaker. If you
need to output the audio, select the checkbox to enable.
Note
When you want to set the audio output using the SNC
audio upload tool, be sure to set Audio upload in the
Audio tab of the Video / Audio menu to Enable.
Playback
Set whether to enable using the playback viewer. Select
the checkbox to enable.
Viewer mode
When the user is authenticated for logging in the viewer,
select the viewer mode to be displayed after
authentication.
Administrator: The user can operate all functions in
this mode.
Full: The user can operate all functions except deleting
the recorded movie in the memory card.