Cleaning The Machine - Manually; Descaling Following A Prompt - Jura ENA3 User Instruction Manual

Table of Contents

Advertisement

ENA 3
T
Close the powder chute for pre-ground
coffee.
PRESS ROTARY
k T
Press the Rotary Switch.
, water flows out of the
CLEANING
coffee spout several times.
EMPTY TRAY
T
Empty the coffee grounds container and
drip tray and replace.
READY
Cleaning the machine – manually
The 'Clean machine' operation can be manually
initiated.
Precondition:
READY
T
Open the cover behind the Rotary Switch.
P T
Press the P button until
appears.
k T
Press the Rotary Switch to enter the
programme item.
RINSE
g T
Turn the Rotary Switch until
displayed.
k T
Press the Rotary Switch.
EMPTY TRAY
T
Continue with the third prompt to take
action (indicated by
section 'Cleaning the machine following
a prompt'.
26
appears on the display.
MAINTENANCE
is
CLEAN
T
), as described in the
Descaling the machine following a prompt
The ENA builds up limescale deposits over time
and automatically prompts you to descale the
machine when necessary. The degree of build-up
depends on the hardness of the water.
J
CAUTION
If the descaling agent comes into contact with the
skin or eyes, this can cause irritation.
T
Avoid contact with the skin or eyes.
T
Rinse the descaling agent off with clean
water. Should you get any descaling agent
in your eye, consult a doctor.
CAUTION
Risk of damage to the machine and residues in
the water if the wrong descaling agent is used.
T
Only use original JURA care products.
CAUTION
Risk of damage to the machine if the descaling
operation is interrupted.
T
Do not interrupt the descaling operation.
CAUTION
Risk of damage if the descaling agent comes into
contact with sensitive surfaces.
T
Remove splashes immediately.
E
The descaling programme lasts approx.
40 minutes.
E
JURA descaling tablets are available from
stockists.
E
If a CLARIS plus filter cartridge is used
and activated, you will not be prompted
to descale the machine.
Precondition:
DE-SCALE
displayed.
T
Open the cover behind the Rotary Switch.
c T
Press the maintenance button.
EMPTY TRAY
/
is
READY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ENA3 and is the answer not in the manual?

Table of Contents

Save PDF