Download Print this page

Kogan KABRP3D4KUA Quick Start Manual page 3

Kogan 3d blu-ray player with 4k upscaling
Hide thumbs Also See for KABRP3D4KUA:

Advertisement

The player complies with the limit regulation on using connection cables within 3 metres in the EMC
directive.
Please put the player in a ventilated place to avoid heat accumulation in the player.
Do not put the player on soft surfaces such as carpets or bedspreads to avoid blocking the vents.
Do not install the player in a narrow location (such as on a bookshelf).
Do not place the player near heat sources or a location where it will receive direct sunlight.
Do not use the player outdoors, in a vehicle or in a boat.
If the player is carried into a warm location from a cool location, the lens in the player may have
condensation on it. If the player does not function correctly after this occurs, please take the disc
out, disconnect the power and set aside for an hour to allow the moisture to evaporate.
The player should be installed in a horizontal position rather than vertical.
The player should be installed and operated at least 20cm away from your body.
Do not place any heavy or unstable objects on the player.
Do not place any objects other than discs on the disc tray.
When you move the player, please take out any discs, or else they may be damaged.
When you move the player, please disconnect it from the power socket.
As long as the power cord of the player is connected to the wall, the AC power supply is still
connected, even if the power supply is turned off.
If you will not be using the player for a long time, please disconnect the power plug from the wall
socket.
Please unplug by holding the plug. Never pull on the cable.
If the power cable is damaged, do not use the player. Contact the Kogan customer support team.
When you listen to any material with low input levels or no audio signals, do not turn the volume up, as you
may hurt your ears or damage the speakers when the volume returns to peak level.
Please wipe the shell, panel and remote control with a soft cloth. Do not use sandpaper, polish or any
cleaning solutions.
Do not use cleaning discs or disc cleansers (either wet or spray kinds), as this may damage the player.
Improper operation may damage the HDMI out port and the connection. Please follow the instructions
below.
Check the shape of the port and connector, then align and connect to the HDMI port and HDMI connector
in the rear of the unit. Make sure that the connector is not upside-down or inclined.
When you move the player, please disconnect the HDMI cable first.
When you connect or disconnect the HDMI cable, please hold the HDMI connector firmly. Do not twist or
force the HDMI plug into the jack.
2

Advertisement

loading

This manual is also suitable for:

Kabrp3dwfib