Advertisement
(Prevent screen
Enable screen saver. If there is no operation within 15 minutes,
burn)
the screen saver will be activated automatically. Unit will enter
standby mode.
Disable this function.
ON
Enable auto-play. When a disc is inserted, the player will read
and start to play automatically.
OFF
ON
When this is enabled, the player is in standby and the device
connected through HDMI will also be in standby.
OFF
Disable this function.
Select this option and press [OK], and the following dialog box
(restore factory
will appear:
settings)
Press direction keys to select [OK] and press it to restore all the
settings to their original defaults, or select [CANCEL] to exit the
dialog box.
(software
The upgrade program is saved on a disc. When the auto-
update)
upgrade function is set to 'OFF', you need to select the upgrade
option manually after inserting the disc.
The upgrade program is saved on the USB disk.
Connect the network cable to the NIC interface and make sure
that the network connection is normal.
(For BD-J disc
When playing BD-J or BD-Live discs, if the storage space is
playing)
insufficient, please select [Format] and press [OK] to clear the
BUDA info on the USB disc to release space.
USB storage is used as the storage media, and when a USB disk
is required, the disk must be formatted in FAT32 mode. (Please
note that a HDD can't be used as the storage media).
English, Chinese
(Set OSD
language)
(Set menu
English, French, Chinese, Spanish, More
language)
(Set audio
language)
English, French, Chinese, Spanish.... More, OFF
(Set subtitle
If the required language isn't in the list, select "more".
language)
If subtitles are not required, select 'OFF'
15
Advertisement
