Advertisement
Select the mode of network access.
(select this option if the network is connected via a
cable).
(Select this option if the network is connected through
a wireless NIC; in this case, the USB interface in the rear side of
the player must be inserted with a wireless NIC with RT7601 x
chip)
To change the network access mode, please disconnect the
current network connection first.
Display network information, such as interface, IP address etc..
Test whether the network is connected successfully. If the
network setting is changed, please check that the settings are
correct in this option.
(connected successfully)
(connection failed, please reset)
(network is connected successfully,
but the proxy setting has an error and needs to be reset).
Set the IP address accordingly in either mode below.
Auto (obtain IP address automatically)
Manual (set IP address manually and open the dialog box
below)
Press left and right direction keys to select different items, then
press down to clear the original settings. Use the number keys
to enter the correct network information.
Once done, press [OK] to save settings, which will take effect
immediately. While setting, you can press [Return] to exit the
dialog box.
If the wireless network is selected, it requires configuration.
Search for available networks in the area and results will be
shown on the screen as shown below, that you can select
accordingly.
Press the direction keys to select the correct wireless network,
the press [OK] and a dialog box will appear for you to enter
your password.
If the network security is set to "None" and it doesn't require a
password, you can press [NEXT] directly. For other options
please enter the password of the wireless network, then press
[NEXT] and press [OK] to complete the wireless set up.
If the connection fails, then the signal may be too weak.
18
Advertisement
