Advertisement
First enter into SETUP menu, then select Universal Setting
Set Internet to ON.
1.
Navigate through the menu to Ethernet.
2.
IP Setting: users can choose manual settings or automatic settings.
3.
After setting, please select Connect to Test; if successful, will show that the internet connection is
OK.
4.
If the connection fails, please unplug the network cable, turn off the player, reinsert the cable and
then start the player again. The system will begin automatically initialising the network. Follow the
3 steps above to the connection test again.
1.
Navigate through the menu to Wireless.
2.
Select wireless setting. (See picture 1)
3.
Select search (see picture 2) and click
'next page'. It will show the wireless
networks that have been discovered (see
picture 3).
4.
Press the arrow key to select the network,
then press OK to connect to it. If required,
you will be prompted to enter the
password (see picture 4). Press OK to
enter into the password entry mode (see
picture 5).
5.
Select the connection test. It will display a
confirmation message if the connection is
successful. (See picture 6)
Confirm after upgrading.
→
Network
→
Internet.
Picture 1
Picture 2
Picture 4
Picture 6
Picture 3
Picture 5
22
Advertisement
