Polaroid Miniportrait 204 Repair Manual page 17

Repair Manual
4. Continued
The program menu (at right) will appear.
Note: For details about each adjustment screen, refer
to the next section, "Programming the camera".
5. Check to make sure the camera aperture is
set according to the film type being used.
6. Aim the camera as follows:
Press the Aiming Button (P) and the Aiming
Light will come on; it will blink for
approximately 15 seconds. Center the
converging light spots on the subject's chin
for proper framing.
Note: Once the Aiming Light goes out, the Shutter
Button is deactivated and a picture cannot be taken
until the Aiming Light Button is pressed again.
7. Press the Shutter Button (C) to take the
picture.
While the strobe is recharging, a WAIT
message is displayed.
A READY message informs the operator that
the second picture on the frame can now be
taken. Also, the next image blinks.
Model 204/404 MiniPortrait Camera
COUNTS
EXPOSURE
PICTURE SELECT
DEVELOPMENT TIME
RESET COUNTS
LANGUAGE
AUTO SHUT OFF
EXIT
Film
T669
T100
T667
1
1
17
FILM
000380
STROBE
001139
Film Speed Aperture
ASA 80 f/11 1/2
ASA 100 f/11 1/2
ASA 3000 f/64
P
Converging light
beams
C
WAIT
Blinking
READY