Polaroid MiniPortrait 206 Quick Reference

Hide thumbs Also See for MiniPortrait 206:

Download this manual See also: User Manual

Setting up the camera

1 Ensure that the camera is set to the correct aperture for the film you are using.

22 32 44

11 16

Film Speed

ASA 80

ASA 100

ASA 125

ASA 3000

2 Set the aiming light switch to "PP" for passport photos or "ID" for ID photos.

3 Load film into the camera.

4 Plug the small end of the AC power cord into the socket on the back of the

camera. Plug the other end into a grounded AC outlet. After about ten seconds,

the green Ready light will come on in the LED display.

MiniPortrait 206 Camera

Quick reference

Aperture

f11-1/2

f16

f64

Page 1: Setting Up The Camera
MiniPortrait 206 Camera Quick reference Setting up the camera 1 Ensure that the camera is set to the correct aperture for the film you are using. 22 32 44 11 16 Film Speed Aperture ASA 80 f11-1/2 ASA 100 f11-1/2...
Page 2: Taking A Picture
Taking a picture 1 Load film into the camera. 2 Place your subject approximately 40 inches (1 meter) in front of the camera. 3 Press the Aiming Button and aim the lights at your subject. The lights blink while you aim the camera. Adjust the camera so that the lights converge on the sub- ject's chin.
Page 3 Aiming tips With the MiniPortrait 206 Camera, there is no need for a viewfinder. The aiming lights ensure that your subject's face will appear exactly where you want it in the picture. Just be sure that the subject is at the appropriate distance from the lens as shown below.
Page 4 Polaroid Corporation certifies that this device complies with the RFI emission requirements of EMC Standard EN55022 Class A. “ P olaroid” and “ M iniPortrait” are registered t rademarks of Polaroid Corporation, Cambridge, MA 02139, U.S.A. PW20306Q-0 Printed in the U.S.A.