Korg TRITON Musical Instrument User Manual page 79

TRITON Training Guide
6 of a Combination, and so on. Bearing in mind that Combinations all fall on the same MIDI channel, the
question arises...
...How can the Sequencer keep track of these separate assignments and only record
and playback the notes for an intended Track, if all the Tracks are on the same MIDI
channel?
The answer is... it can't!
So we need to take each part that has a specific arpeggiator (A or B) assigned to it and set that Track/Timbre
to a different MIDI channel from the other arpeggiated part, AND from the non-arpeggiated parts. If there is
one arpeggiator being used you will need two different MIDI channels. If both arpeggiators are being used
you will need three different MIDI channels (assuming that there are also some non-arpeggiated parts as
well).
This brings us to the second part of this "trick" – how can we trigger all the tones at the same time if they're
on different MIDI channels? The Triton sequencer only allows you to be on one track/MIDI channel at a time.
The answer lies in creating "Dummy Tracks" - a track that is on the same channel as the rest of the
Combination, but is actually turned "Off" under the track's on/off status.
This Dummy Track is assigned to the same Arp. as the track it's going to trigger, but the actual track
containing the Program is set to a Channel other than what the rest of the Combination is set to. So what are
two approaches to Combination/arpeggiator setups that we mentioned earlier? The first is the many
Combinations that have a drum rhythm that plays in the background while you play the keyboard live. These
Combinations have already had the drum part set up on a different MIDI channel from the rest of the sounds,
and already have the Dummy Track created. These are the easiest Combinations to record – simply use
Tutorial 1.
A Combination which keeps all channels the same regardless of Arp. Trigger would require Tutorial 2 to be
followed for correct recording. Examples of these include:
Tutorial 1
Multi Channel Combination -- Using Example Combination A33: "After-T-House"
First, we'll get the Combination into the Sequencer mode:
1. Press the SEQ. button to enter the Sequencer Mode.
2. Touch the arrow on the top right hand side of the screen.
3. Touch "Copy From Combi".
77